Intel Edison Research

From Intel Edison Wiki
Jump to: navigation, search

Everything in this section originates from an Edison module running Intel's standard firmware (build from official source).

U-Boot

Environment

boot > printenv
audio_codec_name=audio_codec="dummy"                                                                                                                                                                                                                                           
boot_target_cmd=run do_flash_os;run do_probe_dfu;run do_compute_target;run mmc-bootargs;run load_kernel;zboot ${loadaddr}                                                                                                                                                      
bootargs_console=console=ttyMFD2 earlyprintk=ttyMFD2,keep                                                                                                                                                                                                                      
bootargs_debug=loglevel=4                                                                                                                                                                                                                                                      
bootargs_ethconfig=cdc                                                                                                                                                                                                                                                         
bootargs_target=multi-user                                                                                                                                                                                                                                                     
bootcmd=echo "Target:${target_name}"; run do_partition; run do_handle_bootargs_mode;                                                                                                                                                                                           
bootdelay=1                                                                                                                                                                                                                                                                    
dfu_alt_info_ram=kernel ram ${loadaddr} 0x800000                                                                                                                                                                                                                               
dfu_alt_info_reset=reset ram 0x0 0x0                                                                                                                                                                                                                                           
dfu_to_sec=3                                                                                                                                                                                                                                                                   
do_audio_support=setenv audio_support platform_mrfld_audio.${audio_codec_name}                                                                                                                                                                                                 
do_boot=run boot_target_cmd;                                                                                                                                                                                                                                                   
do_bootargs_rootfs=setenv bootargs_rootfs rootwait root=PARTUUID=${uuid_rootfs} rootfstype=ext4                                                                                                                                                                                
do_compute_target=if itest.b ${first_install_retry} -gt ${first_install_max_retries} || itest.b ${ota_update_retry} -gt ${ota_update_max_retries}; then echo "Switch to Rescue target"; setenv bootargs_target rescue; saveenv; fi                                             
do_dfu_alt_info_ifwi=setenv dfu_alt_info "ifwi${hardware_id} mmc 0 8192 mmcpart 1;ifwib${hardware_id} mmc 0 8192 mmcpart 2"                                                                                                                                                    
do_dfu_alt_info_mmc=setenv dfu_alt_info "ifwi${hardware_id} mmc 0 8192 mmcpart 1;ifwib${hardware_id} mmc 0 8192 mmcpart 2;u-boot0 part 0 1;u-boot-env0 part 0 2;u-boot1 part 0 3;u-boot-env1 part 0 4;boot part 0 7;rootfs part 0 8;update part 0 9;home part 0 10;vmlinuz fat 0 7;initrd fat 0 7"                                                                                                                                                                                                                                                            
do_dnx=setenv dfu_alt_info ${dfu_alt_info_ram};dfu 0 ram 0 ram;run bootcmd                                                                                                                                                                                                     
do_fallback=echo "Unknown boot mode: $bootargs_mode"; env delete -f bootargs_mode; saveenv; echo "Resetting to default boot mode and reboot..."; reset;                                                                                                                        
do_flash=run do_force_flash_os;                                                                                                                                                                                                                                                
do_flash_ifwi=run do_dfu_alt_info_ifwi ; dfu 0 mmc 0                                                                                                                                                                                                                           
do_flash_os=if itest.b ${do_flash_os_done} -eq 1 ; then echo "Flashing already done..." ; else run do_force_flash_os; fi                                                                                                                                                       
do_flash_os_done=1                                                                                                                                                                                                                                                             
do_flashall=run do_partition;run do_flash_ifwi;run do_flash_os                                                                                                                                                                                                                 
do_force_flash_os=run do_dfu_alt_info_mmc ; sleep 1 ; setenv do_flash_os_done 1 ; saveenv ; dfu 0 mmc 0                                                                                                                                                                        
do_force_partition=echo "Partitioning using GPT"; gpt write mmc 0 ${partitions} ; mmc rescan; setenv do_partition_done 1 ; saveenv                                                                                                                                             
do_handle_bootargs_mode=run do_preprocess_bootargs_mode; if itest.s $bootargs_mode == "ota" ; then run do_ota; fi; if itest.s $bootargs_mode == "boot" ; then run do_boot; fi; if itest.s $bootargs_mode == "flash"; then run do_flash; fi; run do_fallback; exit;             
do_load_ota_scr=if fatload mmc 0:9 $ota_script_addr ota_update.scr ; then setenv ota_status 0 ; else setenv ota_status 1 ; fi                                                                                                                                                  
do_ota=run do_ota_init ; run do_load_ota_scr ; run do_source_ota_scr ; run do_ota_clean                                                                                                                                                                                        
do_ota_clean=saveenv ; reset                                                                                                                                                                                                                                                   
do_ota_init=setenv ota_status 1 ; env delete -f bootargs_mode                                                                                                                                                                                                                  
do_partition=if itest.b ${do_partition_done} -eq 1; then echo "Partitioning already done..."; else run do_force_partition ; fi                                                                                                                                                 
do_partition_done=1                                                                                                                                                                                                                                                            
do_preprocess_bootargs_mode=if env exists bootargs_mode ; then ; else setenv bootargs_mode "boot" ;fi;                                                                                                                                                                         
do_probe_dfu=run do_dfu_alt_info_mmc ; dfu 0 mmc 0 $dfu_to_sec                                                                                                                                                                                                                 
do_source_ota_scr=if test $ota_status -eq 0 ; then if source $ota_script_addr ; then setenv ota_status 0 ; else setenv ota_status 2 ; fi ; fi                                                                                                                                  
first_install_max_retries=3                                                                                                                                                                                                                                                    
first_install_retry=0                                                                                                                                                                                                                                                          
hardware_id=00                                                                                                                                                                                                                                                                 
init_dfu=run do_dfu_alt_info_mmc ; saveenv                                                                                                                                                                                                                                     
load_kernel=fatload mmc 0:7 ${loadaddr} vmlinuz                                                                                                                                                                                                                                
loadaddr=0x100000                                                                                                                                                                                                                                                              
mmc-bootargs=run do_bootargs_rootfs; run do_audio_support; setenv bootargs ${bootargs_rootfs} ${bootargs_console} ${bootargs_debug} g_multi.ethernet_config=${bootargs_ethconfig} systemd.unit=${bootargs_target}.target hardware_id=${hardware_id} g_multi.iSerialNumber=${serial#} g_multi.dev_addr=${usb0addr} ${audio_support}                                                                                                                                                                                                                            
ota_done=0                                                                                                                                                                                                                                                                     
ota_script_addr=0x100000
ota_update_max_retries=3
ota_update_retry=0
partitions=uuid_disk=${uuid_disk};name=u-boot0,start=1MiB,size=2MiB,uuid=${uuid_uboot0};name=u-boot-env0,size=1MiB,uuid=${uuid_uboot_env0};name=u-boot1,size=2MiB,uuid=${uuid_uboot1};name=u-boot-env1,size=1MiB,uuid=${uuid_uboot_env1};name=factory,size=1MiB,uuid=${uuid_factory};name=panic,size=24MiB,uuid=${uuid_panic};name=boot,size=32MiB,uuid=${uuid_boot};name=rootfs,size=1536MiB,uuid=${uuid_rootfs};name=update,size=768MiB,uuid=${uuid_update};name=home,size=-,uuid=${uuid_home};
serial#=e035c067e998f15315ced66d67afb891
stderr=serial
stdin=serial
stdout=serial
target_name=blank
usb0addr=02:00:86:af:b8:91
uuid_boot=db88503d-34a5-3e41-836d-c757cb682814
uuid_disk=21200400-0804-0146-9dcc-a8c51255994f
uuid_factory=333a128e-d3e3-b94d-92f4-d3ebd9b3224f
uuid_home=f13a0978-b1b5-1a4e-8821-39438e24b627
uuid_panic=f20aa902-1c5d-294a-9177-97a513e3cae4
uuid_rootfs=012b3303-34ac-284d-99b4-34e03a2335f4
uuid_uboot0=d117f98e-6f2c-d04b-a5b2-331a19f91cb2
uuid_uboot1=8a4bb8b4-e304-ae48-8536-aff5c9c495b1
uuid_uboot_env0=25718777-d0ad-7443-9e60-02cb591c9737
uuid_uboot_env1=08992135-13c6-084b-9322-3391ff571e19
uuid_update=faec2ecf-8544-e241-b19d-757e796da607

Environment size: 4962/65531 bytes

Various Logs

Output from dmesg

root@edison1:~# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.17-yocto-standard (lth@ncpws04) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Mon May 25 15:36:35 MYT 2015
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000005ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000006000000-0x000000003f4fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f500000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec04000-0x00000000fec07fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f500 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 03F600000 mask FFFE00000 uncachable
[    0.000000]   2 base 03F800000 mask FFF800000 uncachable
[    0.000000]   3 base 004000000 mask FFE000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1014MB, range: 2MB, type UC
[    0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[    0.000000] reg 3, base: 64MB, range: 32MB, type UC
[    0.000000] total RAM covered: 982M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 512M        num_reg: 5      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 512MB, type WB
[    0.000000] reg 1, base: 64MB, range: 32MB, type UC
[    0.000000] reg 2, base: 512MB, range: 512MB, type WB
[    0.000000] reg 3, base: 1014MB, range: 2MB, type UC
[    0.000000] reg 4, base: 1016MB, range: 8MB, type UC
[    0.000000] e820: update [mem 0x04000000-0x05ffffff] usable ==> reserved
[    0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[    0.000000] Base memory trampoline at [c0094000] 94000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[    0.000000]  [mem 0x34000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x03ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x03ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x06000000-0x33ffffff]
[    0.000000]  [mem 0x06000000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01de2000, 0x01de2fff] PGTABLE
[    0.000000] 121MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] BRK [0x01de3000, 0x01de3fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x3f4fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00097fff]
[    0.000000]   node   0: [mem 0x00100000-0x03ffffff]
[    0.000000]   node   0: [mem 0x06000000-0x3f4fffff]
[    0.000000] On node 0 totalpages: 251031
[    0.000000] free_area_init_node: node 0, pgdat c1c12cc0, node_mem_map f740e020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3991 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 216062 pages, LIFO batch:31
[    0.000000]   HighMem zone: 243 pages used for memmap
[    0.000000]   HighMem zone: 30978 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[    0.000000] SFI: SYST E31F0, 0060 (v1  INTEL INTELFDK)
[    0.000000] SFI: CPUS E3296, 0020 (v1  INTEL INTELFDK)
[    0.000000] SFI: FREQ E32C2, 0030 (v1  INTEL INTELFDK)
[    0.000000] SFI: MMAP E32FE, 01A4 (v1  INTEL INTELFDK)
[    0.000000] SFI: XSDT E34B0, 002C (v1  INTEL INTELFDK)
[    0.000000] SFI: APIC E353E, 0020 (v1  INTEL INTELFDK)
[    0.000000] SFI: WAKE E356A, 0020 (v2  INTEL INTELFDK)
[    0.000000] SFI: DEVS E359E, 047D (v1  INTEL INTELFDK)
[    0.000000] SFI: GPIO E3A27, 0964 (v1  INTEL INTELFDK)
[    0.000000] SFI: OEMB E4397, 0060 (v5 UMGFDK CFGINFO!)
[    0.000000] SFI: registering lapic[0]
[    0.000000] SFI: registering lapic[2]
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-54
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 71
[    0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f73e8000 s32896 r0 d24448 u57344
[    0.000000] pcpu-alloc: s32896 r0 d24448 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 249247
[    0.000000] Kernel command line: rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=cdc systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=5b27aa44f006b1284d9d46891c9e77c7 g_multi.dev_addr=02:00:86:9e:77:c7 platform_mrfld_audio.audio_codec=dummy
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003f500)
[    0.000000] Memory: 982796k/1037312k available (6831k kernel code, 21328k reserved, 3619k data, 620k init, 123912k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff8b000 - 0xfffff000   ( 464 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1c35000 - 0xc1cd0000   ( 620 kB)
[    0.000000]       .data : 0xc18abe78 - 0xc1c34dc0   (3619 kB)
[    0.000000]       .text : 0xc1200000 - 0xc18abe78   (6831 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.000000] tsc: Detected 499.200 MHz processor
[    0.000009] Calibrating delay loop (skipped), value calculated using timer frequency.. 998.40 BogoMIPS (lpj=4992000)
[    0.000033] pid_max: default: 32768 minimum: 301
[    0.000260] Security Framework initialized
[    0.000288] SELinux:  Initializing.
[    0.000352] SELinux:  Starting in permissive mode
[    0.000433] Mount-cache hash table entries: 512
[    0.001615] Initializing cgroup subsys devices
[    0.001641] Initializing cgroup subsys freezer
[    0.001659] Initializing cgroup subsys blkio
[    0.001675] Initializing cgroup subsys perf_event
[    0.001819] CPU: Physical Processor ID: 0
[    0.001835] CPU: Processor Core ID: 0
[    0.001856] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.001856] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.001877] mce: CPU supports 6 MCE banks
[    0.001908] CPU0: Thermal monitoring enabled (TM1)
[    0.001951] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.001951] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
[    0.001951] tlb_flushall_shift: 6
[    0.002459] Freeing SMP alternatives: 28k freed
[    0.002514] SFI: MCFG E34F6, 003C (v1  INTEL INTELFDK)
[    0.002535] ftrace: allocating 27672 entries in 55 pages
[    0.070668] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.070752] smpboot: CPU0: Genuine Intel(R) CPU   4000  @  500MHz (fam: 06, model: 4a, stepping: 08)
[    0.070802] TSC deadline timer enabled
[    0.070868] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
[    0.070912] ... version:                3
[    0.070926] ... bit width:              40
[    0.070939] ... generic registers:      2
[    0.070952] ... value mask:             000000ffffffffff
[    0.070965] ... max period:             000000007fffffff
[    0.070977] ... fixed-purpose events:   3
[    0.070990] ... event mask:             0000000700000003
[    0.111344] ftrace: Allocated trace_printk buffers
[    0.162408] CPU 1 irqstacks, hard=f6f8c000 soft=f6f8e000
[    0.162430] smpboot: Booting Node   0, Processors  #1 OK
[    0.172639] Initializing CPU#1
[    0.173601] Skipped synchronization checks as TSC is reliable.
[    0.174033] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.174117] Brought up 2 CPUs
[    0.174139] smpboot: Total of 2 processors activated (1996.80 BogoMIPS)
[    0.176117] devtmpfs: initialized
[    0.186960] SFI: SFI sysfs interfaces init success
[    0.187549] regulator-dummy: no parameters
[    0.188069] NET: Registered protocol family 16
[    0.190148] SFI OEMB Layout
[    0.190186]  OEMB signature               : OEMB
[    0.190186]  OEMB length                  : 96
[    0.190186]  OEMB revision                : 5
[    0.190186]  OEMB checksum                : 0x8D
[    0.190186]  OEMB oem_id                  : UMGFDK
[    0.190186]  OEMB oem_table_id            : CFGINFO!
[    0.190186]  OEMB board_id                : 0x02
[    0.190186]  OEMB iafw version            : 002.012
[    0.190186]  OEMB val_hooks version       : 002.004
[    0.190186]  OEMB ia suppfw version       : 000.000
[    0.190186]  OEMB scu runtime version     : 176.073
[    0.190186]  OEMB ifwi version            : 237.015
[    0.190289] intel_soc_thermal: IPC bus = 0, name =         soc_thrm, irq = 0x 1
[    0.190510] IPC bus, name =        bcove_adc, irq = 0x32
[    0.190715] IPC bus, name =       bcove_thrm, irq = 0x34
[    0.190928] IPC bus, name =  bcove_power_btn, irq = 0x1e
[    0.191103] IPC bus, name =        pmic_ccsm, irq = 0x1b
[    0.191350] SDIO bus = 1, name = bcm43xx_clk_vmmc, ref_clock = 26000000, addr =0x401
[    0.191367] Using generic wifi platform data
[    0.191383] wifi_platform_data: GPIO == 64
[    0.191528] IPC bus, name =        msic_gpio, irq = 0x31
[    0.191712] I2C bus = 1, name =      pcal9555a-1, irq = 0x 0, addr = 0x20
[    0.191748] I2C bus = 1, name =      pcal9555a-2, irq = 0x 0, addr = 0x21
[    0.191780] I2C bus = 1, name =      pcal9555a-3, irq = 0x 0, addr = 0x22
[    0.191812] I2C bus = 1, name =      pcal9555a-4, irq = 0x 0, addr = 0x23
[    0.191844] SPI bus=5, name=         ads7955, irq=0x 0, max_freq=20000000, cs=0
[    0.191867] SPI bus=5, name=          spidev, irq=0x 0, max_freq=25000000, cs=1
[    0.191888] IPC bus, name =        mrfld_sst, irq = 0xff
[    0.192169] pgrr = 000003d5
[    0.192666] PCI: MMCONFIG for domain 0000 [bus 00-00] at [mem 0x3f500000-0x3f5fffff] (base 0x3f500000)
[    0.192691] PCI: MMCONFIG at [mem 0x3f500000-0x3f5fffff] reserved in E820
[    0.192704] PCI: Using MMCONFIG for extended config space
[    0.192718] PCI: Using configuration type 1 for base access
[    0.205763] bio: create slab <bio-0> at 0
[    0.207067] vgaarb: loaded
[    0.207746] SCSI subsystem initialized
[    0.208126] usbcore: registered new interface driver usbfs
[    0.208226] usbcore: registered new interface driver hub
[    0.208458] usbcore: registered new device driver usb
[    0.208770] media: Linux media interface: v0.10
[    0.208851] Linux video capture interface: v2.00
[    0.208923] pps_core: LinuxPPS API ver. 1 registered
[    0.208938] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.208978] PTP clock support registered
[    0.209473]  remoteproc0: intel_rproc_scu is available
[    0.209494]  remoteproc0: Note: remoteproc is still under development and considered experimental.
[    0.209510]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    0.209927]  remoteproc0: registered virtio0 (type 7)
[    0.210172]  remoteproc0: powering up intel_rproc_scu
[    0.210199]  remoteproc0: Booting fw image intel_mid/intel_mid_remoteproc.fw, size 4456
[    0.210239] Started intel scu remote processor
[    0.210257]  remoteproc0: remote processor intel_rproc_scu is now up
[    0.210601] virtio_rpmsg_bus virtio0: creating channel rpmsg_bcove_adc addr 0x24
[    0.210804] virtio_rpmsg_bus virtio0: creating channel rpmsg_mrfl_thermal addr 0x25
[    0.210978] virtio_rpmsg_bus virtio0: creating channel rpmsg_mid_powerbtn addr 0x10
[    0.211146] virtio_rpmsg_bus virtio0: creating channel rpmsg_pmic_ccsm addr 0x19
[    0.211326] virtio_rpmsg_bus virtio0: creating channel rpmsg_msic_gpio addr 0x5
[    0.211497] virtio_rpmsg_bus virtio0: creating channel rpmsg_ipc_command addr 0xa0
[    0.211666] virtio_rpmsg_bus virtio0: creating channel rpmsg_ipc_simple_command addr 0xa1
[    0.211847] virtio_rpmsg_bus virtio0: creating channel rpmsg_ipc_raw_command addr 0xa2
[    0.212017] virtio_rpmsg_bus virtio0: creating channel rpmsg_pmic addr 0xff
[    0.212187] virtio_rpmsg_bus virtio0: creating channel rpmsg_mip addr 0xec
[    0.212356] virtio_rpmsg_bus virtio0: creating channel rpmsg_fw_update addr 0x13
[    0.212551] virtio_rpmsg_bus virtio0: creating channel rpmsg_ipc_util addr 0x12
[    0.212724] virtio_rpmsg_bus virtio0: creating channel rpmsg_flis addr 0xf5
[    0.212897] virtio_rpmsg_bus virtio0: creating channel rpmsg_watchdog addr 0xf8
[    0.213082] virtio_rpmsg_bus virtio0: creating channel rpmsg_umip addr 0x14
[    0.213259] virtio_rpmsg_bus virtio0: creating channel rpmsg_osip addr 0x15
[    0.213433] virtio_rpmsg_bus virtio0: creating channel rpmsg_vrtc addr 0xfa
[    0.213621] virtio_rpmsg_bus virtio0: creating channel rpmsg_fw_logging addr 0x27
[    0.213856] virtio_rpmsg_bus virtio0: creating channel rpmsg_kpd_led addr 0x23
[    0.214038] virtio_rpmsg_bus virtio0: creating channel rpmsg_modem_nvram addr 0xa2
[    0.214228] virtio_rpmsg_bus virtio0: creating channel rpmsg_mid_pwm addr 0x22
[    0.214415] virtio_rpmsg_bus virtio0: rpmsg host is online
[    0.214529] intel_mid_rpmsg rpmsg5: Probed rpmsg_ipc device rpmsg_ipc_command
[    0.214551] intel_mid_rpmsg rpmsg5: Allocating rpmsg_instance
[    0.214606] intel_mid_rpmsg rpmsg6: Probed rpmsg_ipc device rpmsg_ipc_simple_command
[    0.214627] intel_mid_rpmsg rpmsg6: Allocating rpmsg_instance
[    0.214681] intel_mid_rpmsg rpmsg7: Probed rpmsg_ipc device rpmsg_ipc_raw_command
[    0.214701] intel_mid_rpmsg rpmsg7: Allocating rpmsg_instance
[    0.215207] Advanced Linux Sound Architecture Driver Initialized.
[    0.215226] Intel MID platform detected, using MID PCI ops
[    0.215239] PCI: Probing PCI hardware
[    0.215255] PCI: root bus 00: using default resources
[    0.215270] PCI: Probing PCI hardware (bus 00)
[    0.215526] PCI host bridge to bus 0000:00
[    0.215557] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.215581] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.215601] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.215659] pci 0000:00:00.0: [8086:1170] type 00 class 0x060000
[    0.216057] pci 0000:00:01.0: [8086:1190] type 00 class 0x080501
[    0.216129] pci 0000:00:01.0: reg 10: [mem 0xff3fc000-0xff3fc0ff]
[    0.216345] pci 0000:00:01.0: PME# supported from D0 D3hot
[    0.216696] pci 0000:00:01.2: [8086:1190] type 00 class 0x080501
[    0.216763] pci 0000:00:01.2: reg 10: [mem 0xff3fa000-0xff3fa0ff]
[    0.216977] pci 0000:00:01.2: PME# supported from D0 D3hot
[    0.217310] pci 0000:00:01.3: [8086:1190] type 00 class 0x080501
[    0.217378] pci 0000:00:01.3: reg 10: [mem 0xff3fb000-0xff3fb0ff]
[    0.217589] pci 0000:00:01.3: PME# supported from D0 D3hot
[    0.217951] pci 0000:00:02.0: [8086:1182] type 00 class 0x038000
[    0.218021] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc1ffffff]
[    0.218083] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff]
[    0.218142] pci 0000:00:02.0: reg 20: [io  0x7ff8-0x7fff]
[    0.218573] pci 0000:00:04.0: [8086:1191] type 00 class 0x070002
[    0.218639] pci 0000:00:04.0: reg 10: [mem 0xff010000-0xff01007f]
[    0.218853] pci 0000:00:04.0: PME# supported from D0 D3hot
[    0.219187] pci 0000:00:04.1: [8086:1191] type 00 class 0x070002
[    0.219253] pci 0000:00:04.1: reg 10: [mem 0xff010080-0xff0100ff]
[    0.219465] pci 0000:00:04.1: PME# supported from D0 D3hot
[    0.219810] pci 0000:00:04.2: [8086:1191] type 00 class 0x070002
[    0.219877] pci 0000:00:04.2: reg 10: [mem 0xff010100-0xff01017f]
[    0.220090] pci 0000:00:04.2: PME# supported from D0 D3hot
[    0.220424] pci 0000:00:04.3: [8086:1191] type 00 class 0x070002
[    0.220491] pci 0000:00:04.3: reg 10: [mem 0xff010180-0xff0101ff]
[    0.220703] pci 0000:00:04.3: PME# supported from D0 D3hot
[    0.221061] pci 0000:00:05.0: [8086:1192] type 00 class 0x070002
[    0.221129] pci 0000:00:05.0: reg 10: [mem 0xff010400-0xff0107ff]
[    0.221342] pci 0000:00:05.0: PME# supported from D0 D3hot
[    0.221689] pci 0000:00:06.0: [8086:1193] type 00 class 0x088000
[    0.221756] pci 0000:00:06.0: reg 10: [mem 0xff2a0000-0xff2a0fff]
[    0.221968] pci 0000:00:06.0: PME# supported from D0 D3hot
[    0.222305] pci 0000:00:06.1: [8086:1193] type 00 class 0x088000
[    0.222373] pci 0000:00:06.1: reg 10: [mem 0xff2a1000-0xff2a1fff]
[    0.222586] pci 0000:00:06.1: PME# supported from D0 D3hot
[    0.222972] pci 0000:00:07.0: [8086:1194] type 00 class 0x088000
[    0.223040] pci 0000:00:07.0: reg 10: [mem 0xff188000-0xff188fff]
[    0.223253] pci 0000:00:07.0: PME# supported from D0 D3hot
[    0.223599] pci 0000:00:07.1: [8086:1194] type 00 class 0x088000
[    0.223668] pci 0000:00:07.1: reg 10: [mem 0xff189000-0xff189fff]
[    0.223921] pci 0000:00:07.1: PME# supported from D0 D3hot
[    0.224252] pci 0000:00:07.2: [8086:1194] type 00 class 0x088000
[    0.224319] pci 0000:00:07.2: reg 10: [mem 0xff18a000-0xff18afff]
[    0.224532] pci 0000:00:07.2: PME# supported from D0 D3hot
[    0.224888] pci 0000:00:08.0: [8086:1195] type 00 class 0x078000
[    0.224955] pci 0000:00:08.0: reg 10: [mem 0xff18b000-0xff18bfff]
[    0.225168] pci 0000:00:08.0: PME# supported from D0 D3hot
[    0.225496] pci 0000:00:08.1: [8086:1195] type 00 class 0x078000
[    0.225563] pci 0000:00:08.1: reg 10: [mem 0xff18c000-0xff18cfff]
[    0.225777] pci 0000:00:08.1: PME# supported from D0 D3hot
[    0.226117] pci 0000:00:08.2: [8086:1195] type 00 class 0x078000
[    0.226185] pci 0000:00:08.2: reg 10: [mem 0xff18d000-0xff18dfff]
[    0.226397] pci 0000:00:08.2: PME# supported from D0 D3hot
[    0.226737] pci 0000:00:08.3: [8086:1195] type 00 class 0x078000
[    0.226804] pci 0000:00:08.3: reg 10: [mem 0xff18e000-0xff18efff]
[    0.227015] pci 0000:00:08.3: PME# supported from D0 D3hot
[    0.227360] pci 0000:00:09.0: [8086:1196] type 00 class 0x078000
[    0.227427] pci 0000:00:09.0: reg 10: [mem 0xff18f000-0xff18ffff]
[    0.227639] pci 0000:00:09.0: PME# supported from D0 D3hot
[    0.227982] pci 0000:00:09.1: [8086:1196] type 00 class 0x078000
[    0.228048] pci 0000:00:09.1: reg 10: [mem 0xff190000-0xff190fff]
[    0.228260] pci 0000:00:09.1: PME# supported from D0 D3hot
[    0.228603] pci 0000:00:09.2: [8086:1196] type 00 class 0x078000
[    0.228670] pci 0000:00:09.2: reg 10: [mem 0xff191000-0xff191fff]
[    0.228883] pci 0000:00:09.2: PME# supported from D0 D3hot
[    0.229231] pci 0000:00:0a.0: [8086:1197] type 00 class 0x078000
[    0.229298] pci 0000:00:0a.0: reg 10: [mem 0xff3f8000-0xff3f8fff]
[    0.229509] pci 0000:00:0a.0: PME# supported from D0 D3hot
[    0.229851] pci 0000:00:0b.0: [8086:1198] type 00 class 0x108000
[    0.229918] pci 0000:00:0b.0: reg 10: [mem 0xf9038000-0xf903ffff]
[    0.230131] pci 0000:00:0b.0: PME# supported from D0 D3hot
[    0.230464] pci 0000:00:0c.0: [8086:1199] type 00 class 0x088000
[    0.230532] pci 0000:00:0c.0: reg 10: [mem 0xff008000-0xff008fff]
[    0.230575] pci 0000:00:0c.0: reg 14: [mem 0x000ddcc0-0x000ddccf]
[    0.230767] pci 0000:00:0c.0: PME# supported from D0 D3hot
[    0.231111] pci 0000:00:0d.0: [8086:119a] type 00 class 0x040100
[    0.231180] pci 0000:00:0d.0: reg 10: [mem 0x05e00000-0x05ffffff]
[    0.231222] pci 0000:00:0d.0: reg 14: [mem 0xff340000-0xff343fff]
[    0.231263] pci 0000:00:0d.0: reg 18: [mem 0xff344000-0xff344fff]
[    0.231304] pci 0000:00:0d.0: reg 1c: [mem 0xff2c0000-0xff2dffff]
[    0.231344] pci 0000:00:0d.0: reg 20: [mem 0xff300000-0xff33ffff]
[    0.231482] pci 0000:00:0d.0: PME# supported from D0 D3hot
[    0.231826] pci 0000:00:0e.0: [8086:119b] type 00 class 0x088000
[    0.231893] pci 0000:00:0e.0: reg 10: [mem 0xff298000-0xff29bfff]
[    0.231936] pci 0000:00:0e.0: reg 14: [mem 0xff2a2000-0xff2a2fff]
[    0.232129] pci 0000:00:0e.0: PME# supported from D0 D3hot
[    0.232503] pci 0000:00:11.0: [8086:119e] type 00 class 0x0c0320
[    0.232618] pci 0000:00:11.0: reg 10: [mem 0xf9100000-0xf911ffff]
[    0.232834] pci 0000:00:11.0: PME# supported from D0 D3hot
[    0.233182] pci 0000:00:12.0: [8086:119f] type 00 class 0x118000
[    0.233249] pci 0000:00:12.0: reg 10: [mem 0xf9009000-0xf9009fff]
[    0.233292] pci 0000:00:12.0: reg 14: [mem 0xf90a0000-0xf90affff]
[    0.233333] pci 0000:00:12.0: reg 18: [mem 0xfa000000-0xfaffffff]
[    0.233507] pci 0000:00:12.0: PME# supported from D0 D3hot
[    0.233905] pci 0000:00:13.0: [8086:11a0] type 00 class 0x0b4000
[    0.233974] pci 0000:00:13.0: reg 10: [mem 0xff009000-0xff009fff]
[    0.234187] pci 0000:00:13.0: PME# supported from D0 D3hot
[    0.234524] pci 0000:00:14.0: [8086:11a1] type 00 class 0x0b4000
[    0.234592] pci 0000:00:14.0: reg 10: [mem 0xff00b000-0xff00bfff]
[    0.234806] pci 0000:00:14.0: PME# supported from D0 D3hot
[    0.235155] pci 0000:00:15.0: [8086:11a2] type 00 class 0x088000
[    0.235222] pci 0000:00:15.0: reg 10: [mem 0xff192000-0xff192fff]
[    0.235435] pci 0000:00:15.0: PME# supported from D0 D3hot
[    0.235771] pci 0000:00:16.0: [8086:11a3] type 00 class 0x0b4000
[    0.235838] pci 0000:00:16.0: reg 10: [mem 0xff0d9000-0xff0d90ff]
[    0.236051] pci 0000:00:16.0: PME# supported from D0 D3hot
[    0.236399] pci 0000:00:16.1: [8086:11a4] type 00 class 0x0b4000
[    0.236466] pci 0000:00:16.1: reg 10: [mem 0x04819000-0x04898fff]
[    0.236509] pci 0000:00:16.1: reg 14: [mem 0x04919000-0x04920fff]
[    0.236701] pci 0000:00:16.1: PME# supported from D0 D3hot
[    0.237083] pci 0000:00:17.0: [8086:11a5] type 00 class 0x088000
[    0.237150] pci 0000:00:17.0: reg 10: [mem 0xff013000-0xff013fff]
[    0.237363] pci 0000:00:17.0: PME# supported from D0 D3hot
[    0.237702] pci 0000:00:18.0: [8086:11a6] type 00 class 0x038000
[    0.237955] pci 0000:00:18.0: PME# supported from D0 D3hot
[    0.238336] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.238503] PCI: pci_cache_line_size set to 64 bytes
[    0.238775] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
[    0.238797] e820: reserve RAM buffer [mem 0x3f500000-0x3fffffff]
[    0.239573] Bluetooth: Core ver 2.16
[    0.239666] NET: Registered protocol family 31
[    0.239684] Bluetooth: HCI device and connection manager initialized
[    0.239714] Bluetooth: HCI socket layer initialized
[    0.239741] Bluetooth: L2CAP socket layer initialized
[    0.239809] Bluetooth: SCO socket layer initialized
[    0.240488] cfg80211: Calling CRDA to update world regulatory domain
[    0.241747] intel_scu_flis platform device created
[    0.241838] hsu core clock 38 M
[    0.242015] intel_pmu_driver 0000:00:14.0: PMU DRIVER Probe called
[    0.243301] intel_pmu_driver 0000:00:14.0: after pmu initialization
[    0.243434] Switching to clocksource refined-jiffies
[    0.501464] intel_scu_flis rpmsg12: Probed flis rpmsg device
[    0.501492] intel_scu_flis rpmsg12: Allocating rpmsg_instance
[    0.501656] intel_scu_flis intel_scu_flis: scu flis probed
[    0.522189] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.522217] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.522471] NET: Registered protocol family 2
[    0.523504] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.523715] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[    0.524008] TCP: Hash tables configured (established 8192 bind 8192)
[    0.524107] TCP: reno registered
[    0.524137] UDP hash table entries: 512 (order: 2, 24576 bytes)
[    0.524204] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[    0.524653] NET: Registered protocol family 1
[    0.525188] RPC: Registered named UNIX socket transport module.
[    0.525208] RPC: Registered udp transport module.
[    0.525221] RPC: Registered tcp transport module.
[    0.525234] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.527748] PCI: CLS 0 bytes, default 64
[    0.527837] intel_scu_pmic rpmsg8: Probed pmic rpmsg device
[    0.527859] intel_scu_pmic rpmsg8: Allocating rpmsg_instance
[    0.528523] intel_scu_watchdog_evo rpmsg13: Probed watchdog rpmsg device
[    0.528547] intel_scu_watchdog_evo rpmsg13: Allocating rpmsg_instance
[    0.529239] intel_scu_ipcutil rpmsg11: Probed ipcutil rpmsg device
[    0.529262] intel_scu_ipcutil rpmsg11: Allocating rpmsg_instance
[    0.529403] (oshob) base addr = 0xfffff000
[    0.529419] (oshob) identified platform = INTEL_MID_CPU_CHIP_TANGIER
[    0.529436] (oshob) oshob version = 1.4
[    0.529488] (latest extend oshob) osnib ptr = 0xfffff800
[    0.529503] Using latest extended oshob structure size = 1024 bytes
[    0.529517] OSNIB Intel size = 32 bytes OEMNIB size = 96 bytes
[    0.529530] (extend oshob) SCU buffer size is 16 bytes
[    0.529598] [BOOT] RESETSRC0=0x00 RESETSRC1=0x00 (PMIT interrupt tree)
[    0.529671] [BOOT] SCU_TR[0]=0x00020011
[    0.529686] [BOOT] SCU_TR[1]=0x00000820
[    0.529699] [BOOT] SCU_TR[2]=0x00000000
[    0.529712] [BOOT] SCU_TR[3]=0x00000000
[    0.529724] [BOOT] IA_TR=0x00000000 (oshob)
[    0.530061] [BOOT] RR=[fastboot] WD=0x00 ALARM=0x00 (osnib)
[    0.530077] [BOOT] WAKESRC=[real reset] (osnib)
[    0.530092] [BOOT] RESETSRC0=0x00 RESETSRC1=0x02 (osnib)
[    0.530161] OEMNIB interface registered to debugfs
[    0.530547] iio_basincove_gpadc rpmsg0: Probed bcove_gpadc rpmsg device
[    0.531215] bcove_adc bcove_adc: bcove adc probed
[    0.532250] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.534321] cryptomgr_test (31) used greatest stack depth: 7540 bytes left
[    0.534530] cryptomgr_test (32) used greatest stack depth: 7372 bytes left
[    0.536804] vprog1: 1500 <--> 2800 mV at 2800 mV normal 
[    0.537517] vprog2: 1500 <--> 2850 mV at 2850 mV normal 
[    0.538228] vprog3: 1050 <--> 2800 mV at 1050 mV normal 
[    0.539542] audit: initializing netlink socket (disabled)
[    0.539626] type=2000 audit(1432630353.460:1): initialized
[    0.686459] bounce pool size: 64 pages
[    0.704161] NFS: Registering the id_resolver key type
[    0.704227] Key type id_resolver registered
[    0.704245] Key type id_legacy registered
[    0.704276] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.704807] fuse init (API version 7.22)
[    0.705599] msgmni has been set to 1677
[    0.706174] SELinux:  Registering netfilter hooks
[    0.709304] Key type asymmetric registered
[    0.709326] Asymmetric key parser 'x509' registered
[    0.709441] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.709682] io scheduler noop registered
[    0.709974] io scheduler cfq registered (default)
[    0.709990] list_sort_test: start testing list_sort()
[    0.713320] intel_idle: MWAIT substates: 0x33000020
[    0.713340] intel_idle: v0.4 model 0x4A
[    0.713355] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.713632] intel_mid_dma 0000:00:0e.0: setting latency timer to 64
[    0.714285] intel_mid_dma 0000:00:15.0: setting latency timer to 64
[    0.715993] HSU DMA 0000:00:05.0: FUNC: 0 driver: 5 addr:ff010400 len:400
[    0.716254] HSU serial 0000:00:04.0: FUNC: 0 driver: 0 addr:ff010000 len:80
[    0.716312] HSU serial 0000:00:04.1: FUNC: 1 driver: 0 addr:ff010080 len:80
[    0.716393] Found a Intel HSU
[    0.717231] 0000:00:04.1: ttyMFD0 at MMIO 0xff010080 (irq = 28) is a hsu_bt_port_p
[    0.717775] HSU serial 0000:00:04.2: FUNC: 2 driver: 0 addr:ff010100 len:80
[    0.717861] Found a Intel HSU
[    0.718661] 0000:00:04.2: ttyMFD1 at MMIO 0xff010100 (irq = 29) is a hsu_uart1_port_p
[    0.719195] HSU serial 0000:00:04.3: FUNC: 3 driver: 0 addr:ff010180 len:80
[    0.719279] Found a Intel HSU
[    0.719953] 0000:00:04.3: ttyMFD2 at MMIO 0xff010180 (irq = 54) is a hsu_uart2_port_p
[    0.725090] console [ttyMFD2] enabled
[    0.726227] Non-volatile memory driver v1.3
[    0.726955] Linux agpgart interface v0.103
[    0.727488] [drm] Initialized drm 1.1.0 20060810
[    0.741445] brd: module loaded
[    0.749121] loop: module loaded
[    0.752073] emmc_ipanic: init success
[    0.752835] tun: Universal TUN/TAP device driver, 1.6
[    0.752854] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.753258] usbcore: registered new interface driver asix
[    0.753340] usbcore: registered new interface driver cdc_subset
[    0.753483] usbcore: registered new interface driver cdc_ncm
[    0.753745] dwc3_otg 0000:00:11.0: setting latency timer to 64
[    0.755944] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.756281] usbcore: registered new interface driver cdc_acm
[    0.756299] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.756404] usbcore: registered new interface driver usb-storage
[    0.756588] usbcore: registered new interface driver usbserial
[    0.756659] usbcore: registered new interface driver pl2303
[    0.756729] usbserial: USB Serial support registered for pl2303
[    0.757648] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    0.757806] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    0.757861] i2c /dev entries driver
[    0.758847] pca953x 1-0020: failed reading register
[    0.763784] pca953x: probe of 1-0020 failed with error -121
[    0.764098] pca953x 1-0021: failed reading register
[    0.764195] pca953x: probe of 1-0021 failed with error -121
[    0.769162] pca953x 1-0022: failed reading register
[    0.769252] pca953x: probe of 1-0022 failed with error -121
[    0.774299] pca953x 1-0023: failed reading register
[    0.779119] pca953x: probe of 1-0023 failed with error -121
[    0.913670] coretemp: Enabled Aux0/Aux1 interrupts for coretemp
[    0.913803] coretemp: Enabled Aux0/Aux1 interrupts for coretemp
[    1.013304] MCU detected and ready to used!
[    1.013427] bcove_thrm rpmsg1: Probed mrfl_thermal rpmsg device
[    1.019455] thermal thermal_zone0: failed to read out thermal zone 0
[    1.020584] thermal thermal_zone2: failed to read out thermal zone 2
[    1.023148] Bluetooth: HCI UART driver ver 2.2
[    1.023170] Bluetooth: HCI H4 protocol initialized
[    1.023645] cpuidle: using governor ladder
[    1.024278] cpuidle: using governor menu
[    1.024348] sdhci: Secure Digital Host Controller Interface driver
[    1.024362] sdhci: Copyright(c) Pierre Ossman
[    1.024437] sdhci-pci 0000:00:01.0: SDHCI controller found [8086:1190] (rev 1)
[    1.024521] flis_addr mapped addr: f8496900
[    1.024644] sdhci-pci 0000:00:01.0: rte_addr mapped addr: f849a000
[    1.024708] sdhci-pci 0000:00:01.0: setting latency timer to 64
[    1.024737] mmc0: no vqmmc regulator found
[    1.117262] mmc0: BKOPS_EN bit is not set
[    1.425994] mmc0: new HS200 MMC card at address 0001
[    1.426817] mmcblk0: mmc0:0001 H4G1d 3.64 GiB 
[    1.427248] mmcblk0boot0: mmc0:0001 H4G1d partition 1 4.00 MiB
[    1.427691] mmcblk0boot1: mmc0:0001 H4G1d partition 2 4.00 MiB
[    1.428116] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
[    1.434008]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[    1.442352]  mmcblk0boot1: unknown partition table
[    1.445985]  mmcblk0boot0: unknown partition table
[    1.446403] mmc0: SDHCI controller on PCI [0000:00:01.0] using ADMA
[    1.465248] emmc_ipanic: panic partition found, label:panic, device:mmcblk0p6
[    1.525302] Switching to clocksource tsc
[    1.564953] emmc_ipanic: emmc_panic_notify_add: bad magic 0, no data available
[    1.566659] sdhci-pci 0000:00:01.2: SDHCI controller found [8086:1190] (rev 1)
[    1.595815] sdhci-pci 0000:00:01.2: setting latency timer to 64
[    1.595856] mmc1: no vqmmc regulator found
[    1.596258] mmc1: SDHCI controller on PCI [0000:00:01.2] using ADMA
[    1.606093] sdhci-pci 0000:00:01.3: SDHCI controller found [8086:1190] (rev 1)
[    1.606225] vwlan gpio 96
[    1.606637] vwlan: 1800 mV 
[    1.606902] sdhci-pci 0000:00:01.3: setting latency timer to 64
[    1.606934] mmc2: no vqmmc regulator found
[    1.607372] mmc2: SDHCI controller on PCI [0000:00:01.3] using ADMA
[    1.616301] hidraw: raw HID events driver (C) Jiri Kosina
[    1.616941] usbcore: registered new interface driver usbhid
[    1.616961] usbhid: USB HID core driver
[    1.617045] intel_scu_fw_update rpmsg10: Probed fw_update rpmsg device
[    1.617066] intel_scu_fw_update rpmsg10: Allocating rpmsg_instance
[    1.622214] usbcore: registered new interface driver snd-usb-audio
[    1.623343] snd_soc_sst_platform: Enter:sst_soc_probe
[    1.981910] snd-soc-dummy snd-soc-dummy: ASoC: Failed to create platform debugfs directory
[    1.982138] merr_dpcm_dummy merr_dpcm_dummy.0:  snd-soc-dummy-dai <-> Headset-cpu-dai mapping ok
[    1.982276] merr_dpcm_dummy merr_dpcm_dummy.0:  snd-soc-dummy-dai <-> ssp2-codec mapping ok
[    1.982425] merr_dpcm_dummy merr_dpcm_dummy.0:  snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok
[    1.984367] snd_merr_dpcm_probe successful
[    1.984454] snd_intel_sst: INFO: ******** SST DRIVER loading.. Ver: 3.0.8
[    1.984980] snd_intel_sst: Got drv data max stream 25
[    1.987760] snd_intel_sst: intel_sst_probe successfully done!
[    1.987825] snd_intel_sst: runtime_idle called
[    1.987845] snd_intel_sst: runtime_suspend called
[    1.988167] oprofile: using NMI interrupt.
[    1.988615] TCP: cubic registered
[    1.988633] Initializing XFRM netlink socket
[    1.989833] NET: Registered protocol family 10
[    1.991215] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.991491] sit: IPv6 over IPv4 tunneling driver
[    1.992436] NET: Registered protocol family 17
[    1.992507] NET: Registered protocol family 15
[    1.992659] Bridge firewalling registered
[    1.993016] Bluetooth: RFCOMM TTY layer initialized
[    1.993077] Bluetooth: RFCOMM socket layer initialized
[    1.993094] Bluetooth: RFCOMM ver 1.11
[    1.993110] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.993124] Bluetooth: BNEP filters: protocol multicast
[    1.993153] Bluetooth: BNEP socket layer initialized
[    1.993169] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.993195] Bluetooth: HIDP socket layer initialized
[    1.993337] l2tp_core: L2TP core driver, V2.0
[    1.993412] Key type dns_resolver registered
[    1.994891] Using IPI No-Shortcut mode
[    1.994968] info[ 0]: name = power_btn, gpio = -1
[    1.994986] info[ 1]: name = SW1UI4, gpio = 61
[    1.996323] registered taskstats version 1
[    1.998611] intel_mid_ssp_spi_unified 0000:00:07.0: found PCI SSP controller (ID: 8086h:1194h cfg: 0dh)
[    1.999530] intel_mid_ssp_spi_unified 0000:00:07.0: register with SPI framework (bus spi3)
[    1.999693] intel_mid_ssp_spi_unified 0000:00:07.0: master is unqueued, this is deprecated
[    1.999724] intel_mid_ssp_spi_unified 0000:00:07.0: Unbalanced pm_runtime_enable!
[    2.005655] intel_mid_ssp_spi_unified 0000:00:07.1: found PCI SSP controller (ID: 8086h:1194h cfg: 15h)
[    2.006547] intel_mid_ssp_spi_unified 0000:00:07.1: register with SPI framework (bus spi5)
[    2.006711] intel_mid_ssp_spi_unified 0000:00:07.1: master is unqueued, this is deprecated
[    2.008562] intel_mid_ssp_spi_unified 0000:00:07.1: Unbalanced pm_runtime_enable!
[    2.015730] intel_mid_ssp_spi_unified 0000:00:07.2: found PCI SSP controller (ID: 8086h:1194h cfg: 19h)
[    2.016563] intel_mid_ssp_spi_unified 0000:00:07.2: register with SPI framework (bus spi6)
[    2.016740] intel_mid_ssp_spi_unified 0000:00:07.2: master is unqueued, this is deprecated
[    2.016770] intel_mid_ssp_spi_unified 0000:00:07.2: Unbalanced pm_runtime_enable!
[    2.025722] console [netcon0] enabled
[    2.025740] netconsole: network logging started
[    2.026269] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    2.026905] rtc_cmos rtc_cmos: setting system clock to 2015-05-26 08:52:36 UTC (1432630356)
[    2.026984] pmic_ccsm rpmsg3: Probed pmic_ccsm rpmsg device
[    2.027184] pmic_ccsm pmic_ccsm: PMIC-ID: c9
[    2.027208] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk
[    2.035846] pmic_ccsm pmic_ccsm: Battery Zone changed. Current zone is 5
[    2.038606] APIC ID: 0
[    2.038623] APIC ID: 2
[    2.038693] Num p-states 2
[    2.038712] State [0]: core_frequency[500] transition_latency[100] control[0x52c]
[    2.038727] State [1]: core_frequency[500] transition_latency[100] control[0x52c]
[    2.038898] Num p-states 2
[    2.038917] State [0]: core_frequency[500] transition_latency[100] control[0x52c]
[    2.038932] State [1]: core_frequency[500] transition_latency[100] control[0x52c]
[    2.039395] msic_power_btn rpmsg2: Probed mid_pb rpmsg device
[    2.039461] msic_power_btn mid_powerbtn: Probed mid powerbutton devivce
[    2.039806] input: mid_powerbtn as /devices/platform/mid_powerbtn/input/input1
[    2.041330] ALSA device list:
[    2.041350]   #0: Loopback 1
[    2.041365]   #1: dummy-audio
[    2.045410] pmic_ccsm pmic_ccsm: Battery Over heat exception
[    2.045481] pmic_ccsm pmic_ccsm: USB VBUS Detected. Notifying OTG driver
[    2.045506] pmic_ccsm pmic_ccsm: Battery0 temperature outside boundary
[    2.130856] EXT4-fs (mmcblk0p8): INFO: recovery required on readonly filesystem
[    2.130880] EXT4-fs (mmcblk0p8): write access will be enabled during recovery
[    2.161386] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    2.161425] mmc2: new ultra high speed DDR50 SDIO card at address 0001
[    2.162972] EXT4-fs (mmcblk0p8): recovery complete
[    2.164338] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[    2.164417] VFS: Mounted root (ext4 filesystem) readonly on device 179:8.
[    2.164965] devtmpfs: mounted
[    2.165457] Freeing unused kernel memory: 620k freed
[    2.166276] Write protecting the kernel text: 6832k
[    2.167192] Write protecting the kernel read-only data: 2956k
[    2.167206] NX-protecting the kernel data: 5456k
[    2.383042] systemd[1]: systemd 213 running in system mode. (-PAM -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    2.384513] systemd[1]: Detected architecture 'x86'.
[    2.497809] systemd[1]: Set hostname to <edison1>.
[    2.501457] systemd[1]: Hardware watchdog 'Intel_SCU IOH Watchdog', version 0
[    2.501542] systemd[1]: Set hardware watchdog to 1min 30s.
[    2.522129] systemd-rc-loca (99) used greatest stack depth: 6364 bytes left
[    2.530992] systemd-fstab-generator[96]: Checking was requested for "rootfs", but it is not a device.
[    2.691721] systemd[1]: [/lib/systemd/system/connman.service:15] Unknown lvalue 'StandartOutput' in section 'Service'
[    2.692782] systemd[1]: Configuration file /lib/systemd/system/connman-init.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[    2.791503] systemd[1]: Expecting device dev-ttyMFD2.device...
[    2.835657] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    2.836275] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.836394] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
[    2.885583] systemd[1]: Starting Remote File Systems.
[    2.935503] systemd[1]: Reached target Remote File Systems.
[    2.935637] systemd[1]: Expecting device dev-disk-by\x2dpartlabel-factory.device...
[    2.985595] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    2.986065] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.986177] systemd[1]: Starting Paths.
[    3.035490] systemd[1]: Reached target Paths.
[    3.035754] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.085505] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.085646] systemd[1]: Starting Swap.
[    3.135470] systemd[1]: Reached target Swap.
[    3.135644] systemd[1]: Set up automount Automount for SDCard.
[    3.135744] systemd[1]: Starting boot.automount.
[    3.194522] systemd[1]: boot.automount: Directory /boot to mount over is not empty, mounting anyway.
[    3.245577] systemd[1]: Set up automount boot.automount.
[    3.245736] systemd[1]: Starting Root Slice.
[    3.365491] systemd[1]: Created slice Root Slice.
[    3.365677] systemd[1]: Starting Journal Socket.
[    3.415436] systemd[1]: Listening on Journal Socket.
[    3.415612] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.465431] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.465592] systemd[1]: Starting udev Kernel Socket.
[    3.515416] systemd[1]: Listening on udev Kernel Socket.
[    3.515571] systemd[1]: Starting udev Control Socket.
[    3.565413] systemd[1]: Listening on udev Control Socket.
[    3.565531] systemd[1]: Starting Delayed Shutdown Socket.
[    3.615405] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.615521] systemd[1]: Starting User and Session Slice.
[    3.665423] systemd[1]: Created slice User and Session Slice.
[    3.665565] systemd[1]: Starting System Slice.
[    3.715414] systemd[1]: Created slice System Slice.
[    3.777917] systemd[1]: Started Set Up Additional Binary Formats.
[    3.779674] systemd[1]: Starting Apply Kernel Variables...
[    3.834030] systemd[1]: Starting Load Kernel Modules...
[    3.879439] systemd[1]: Mounted Huge Pages File System.
[    3.879669] systemd[1]: Mounting POSIX Message Queue File System...
[    3.915671] dhd_module_init in
[    3.915705] found wifi platform device wlan
[    3.915818] Power-up adapter 'DHD generic adapter'
[    3.919780] systemd[1]: Starting udev Coldplug all Devices...
[    3.979964] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.032808] systemd[1]: Mounting Debug File System...
[    4.072035] systemd[1]: Starting Journal Service...
[    4.209737] systemd[1]: Started Journal Service.
[    4.276155] wifi_platform_set_power = 1
[    4.405101] EXT4-fs (mmcblk0p8): re-mounted. Opts: discard,barrier=1,data=ordered,noauto_da_alloc
[    4.485048] wifi_platform_bus_enumerate device present 1
[    4.583433] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    4.583655] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    4.583677] bus num (host idx)=2, slot num (rca)=1
[    4.583692] found adapter info 'DHD generic adapter'
[    4.593934] F1 signature OK, socitype:0x1 chip:0xa94c rev:0x2 pkg:0x0
[    4.595514] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
[    4.605409] wifi_platform_get_mac_addr
[    4.605482] wifi_get_mac_addr_intel: unable to open /config/wifi/mac.txt
[    4.625120] wl_create_event_handler(): thread:wl_event_handler:7b started
[    4.625138] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xf5fe1540
[    4.625700] dhd_attach(): thread:dhd_watchdog_thread:7c started
[    4.625855] dhd_attach(): thread:dhd_dpc:7d started
[    4.625885] dhd_deferred_work_init: work queue initialized 
[    4.635468] Dongle Host Driver, version 1.141.59 (r)
[    4.635468] Compiled in /home/lth/src/edison-src/out/linux64/build/tmp/work/edison-poky-linux/bcm43340-mod/1.141-r47/git on May 25 2015 at 18:59:57
[    4.636576] Register interface [wlan0]  MAC: 00:00:00:00:00:00
[    4.636576] 
[    4.636604] dhd_prot_ioctl : bus is down. we have nothing to do
[    4.637260] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    4.637382] wifi_platform_set_power = 0
[    4.638460] wifi_platform_bus_enumerate device present 0
[    4.734777] g_multi gadget: using random host ethernet address
[    4.736081] usb0: MAC 02:00:86:9e:77:c7
[    4.736104] usb0: HOST MAC 5a:78:04:99:6f:cc
[    4.746353] g_multi gadget: Mass Storage Function, version: 2009/09/11
[    4.746380] g_multi gadget: Number of LUNs=1
[    4.746408]  lun0: LUN: file: /dev/mmcblk0p9
[    4.746632] g_multi gadget: Multifunction Composite Gadget
[    4.746653] g_multi gadget: g_multi ready
[    4.752829] systemd-modules (104) used greatest stack depth: 5504 bytes left
[    5.816744] systemd-udevd[141]: starting version 213
[    6.006956] g_multi gadget: high-speed config #2: Multifunction with CDC ECM
[    6.223342] systemd-journald[112]: Received request to flush runtime journal from PID 1
[    6.238206] systemd-journald[112]: File /var/log/journal/4e2545e7ac7448fdb2184d96452ecaa0/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    6.926927] EXT4-fs (mmcblk0p5): mounted filesystem without journal. Opts: discard,barrier=1,data=ordered,noauto_da_alloc
[    8.960727] 
[    8.960727] Dongle Host Driver, version 1.141.59 (r)
[    8.960727] Compiled in /home/lth/src/edison-src/out/linux64/build/tmp/work/edison-poky-linux/bcm43340-mod/1.141-r47/git on May 25 2015 at 18:59:57
[    8.960760] wl_android_wifi_on in
[    8.960778] wifi_platform_set_power = 1
[    9.560146] F1 signature OK, socitype:0x1 chip:0xa94c rev:0x2 pkg:0x0
[    9.562150] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
[    9.565011] dhdsdio_download_firmware: firmware path=/etc/firmware/fw_bcmdhd.bin, nvram path=/etc/firmware/bcmdhd.cal
[    9.681110] sdioh_request_buffer: [1] doing memory copy buf=f5cdf000, len=18
[    9.686839] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[    9.848406] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[    9.853956] wifi_platform_get_mac_addr
[    9.853998] wifi_get_mac_addr_intel: unable to open /config/wifi/mac.txt
[    9.859564] Firmware up: op_mode=0x0015, MAC=fc:c2:de:3c:8e:71
[    9.877361] Firmware version = wl0: Jan 30 2015 19:22:32 version 6.20.190.3 (r530911) FWID 01-5b07cccc
[    9.878316] dhd_preinit_ioctls wl ampdu_hostreorder failed -23
[    9.974323] CFG80211-ERROR) wl_update_wiphybands : bw_cap failed, -23
[   10.153366] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : P2P interface registered
[   10.176328] WLC_E_IF: NO_IF set, event Ignored
[   10.248905] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: discard,barrier=1,data=ordered,noauto_da_alloc